Clearomiseur Justfog Q16 FF

Product Introduction

Justfog evolves its Q16 clearomiser in a version called “FF” = Focused Flavor which can be translated as “concentrated flavor”.  If the design, the capacity of 1.9 ml and the diameter of 16 mm remain identical to the other generations of Q16, Justfog has made some changes to adjust as closely as possible to the needs of vapers.

The Justfog clearomiser is equipped with a 510 drip tip identical to the entire range of Q16 clearomisers.

Justfog has set up an ingenious filling system which is characterized by the presence of a quarter-turn ring which opens an orifice into which the liquid is introduced. Practical and without dismantling, the system is precise and easy to use on a daily base

The resistor is housed in the lower part of the clearomiser. Finally, Justfog’s latest feat is to offer “Flavour Focused” coils whose main action is to restore flavors as faithfully as possible. The results are without appeal whatever the type of liquid: classic nicotine, nicotine salt, CBD, or Végétol.

Power of use:

• The Q16 FF 1.2 ohm resistor is used over a range between 8 W and 14 W for indirect draw.

A clearomizer which is certainly in line with the Justfog Q16 but which changes its filling mode and integrates resistors which behave like real aroma enhancers. Small in size and easy to use, it is suitable for beginner vapers, regardless of the type of liquid chosen (classic nicotine, nicotine salts, CBD or Vegetol).

We advise you for a first purchase to test several different liquids, for example at least one Classic flavor and at least one fruity flavor.

contents

• 1 clearomiseur Justfog Q16 FF
• 1 résistance Justfog Q16 FF 1.2 ohm

Features

• Length: 5.5cm
• Diameter: 1.6cm
• Weight: 22g
• Capacity: 1.9ml
• No screw 510
• Drip tip 510 amovible
• Compatible with Justfog Q16 FF resistors
• Stainless steel and pyrex
• Type of inhalation: indirect
• Type of vapor: tight
• Steam: cold
• Percentage of VG in liquid for optimal use: ≤ 50% vegetable glycerin
• Beginner level

Utilisation

Change the resistance:
Unscrew the Q16 FF clearomiser from its box. Place the head down and unscrew the base of the clearomizer where the airflow is. Unscrew the resistance and mount a new one. Reassembly will be done in the reverse order of operations.

Fill your  Justfog  Q16 FF clearomiser  :
Unscrew the top cap a quarter turn, fill your clearomiser through the slot provided for this purpose. If the resistance is new, wait a few minutes for the cotton of the resistance to be well impregnated.

Adjust the Airflow:
To adjust the airflow, simply move the adjustment stud on the air inlet slot.