SMOK RPM40 Pod Kit
It works with 1 18650 battery (not supplied). It is also managed by the IQ-80 chipset from Smok which allows it to offer up to 80W of power. The power level is adjustable thanks to its customizable color screen and two management buttons.
This kit works with a 5ml capacity cartridge, refillable from above, with interchangeable resistance and adjustable air flow system. It is compatible with all the resistors of the RPM and RGC series. But it comes with two cartridges: one with an RPM Mesh resistance of 0.4ohm, the other with an RGC Conical Mesh resistance of 0.17ohm.
the RPM80 Pro kit is managed by the Smok IQ-80 chipset which allows it to offer up to 80W of power. The power level is also adjustable via its 0.96 "color TFT screen and its two dimming buttons. Thanks to its clear and intuitive screen you will also find all the information necessary for its operation, as much as possible customize the color of the display.
The cartridges of the RPM80 Pro finally offer an adjustable air flow system to offer a more or less tight draft while saving the flavors.
Dimensions: 118 x 26 x 31.5 mm
Battery: 1 18650 battery (not included)
Output voltage: 0.8-4V
Power range: 1-80W Charging
current: 1.3A max
Operating mode: VW
Chipset IQ- 80 Smok
TFT 0.96 "color screen
Possibility to customize the color of the screen display
Charging via micro-USB cable
Complete electronic protection package
Resistance range: 0.13-2.5ohm Compatible resistors: resistors RPM and RGC series
Adjustable air flow system
Refillable cartridge - replaceable resistance
Two compatible cartridges with integrated resistance:
- 5 ml RPM80 Pro cartridge with 0.4ohm RPM Mesh resistor
- 5 ml RPM80 Pro cartridge with RGC Conical Mesh 0.17ohm resistance
1 x RPM80 Pro
1 x 5 ml RPM80 Pro cartridge with 0.4ohm RPM Mesh resistor (pre-installed)
1 x 5 ml RPM80 Pro cartridge with 0.17ohm RGC Conical Mesh resistor (pre-installed)
1 x micro-USB cable
1 x manual of use